ECCO Machine TLX 45 Titanium Suppressor
$625.00
Welded titanium 10-baffle 9mm can for pistols, carbines and SMGs.
2 in stock
Description
Want a tough can that is light enough to run on locked breech pistols without a booster*? Meet the TLX! Made from 6Al-4V gr. 5 titanium, it is a fully welded 10 baffle tubeless suppressor that can be used on pistols, carbines and sub machine guns. The Alpha pattern threads in the rear will accept 1.125-28 threaded mounts and adapters, including 3 lug and Griffin Cam Lok & EZ Lok**. TLX comes standard with an ultralight 7075-T651 direct thread mount, selectable in the dropdown menu for “mount” All Ultralight aluminum direct thread mounts are muzzle registering (“face mount”).
TLX has been subjected to torture testing with back-to-back-to-back magazine dumps on 900+ RPM sub machine guns, 10.5″ 5.56 AR, full auto 16″ AK47, 18″ barrel .308 and even a 22″ .300 win mag! (these are not approved uses, BTW) Despite its scant weight, it’s a tough little bugger!
Caliber: 9mm or .45
Rated for: (9mm model) 9x19mm, .357 Magnum, .300 blk, 7.62×39, 9×39, .350 Legend (.45 model) .45 ACP, .44 magnum, .450 Bushmaster, .458 SOCOM, .45-70. See bottom of page for calculations to determine other acceptable cartridges
Full Auto Rated: Yes, keep suppressor under 800°F. Slow fire with high velocity rifle rounds.
Minimum Barrel Length: None with service pistol cartridges & subsonic .300 blk, 5″ with full power .357 or similar, 12″ with large magnum pistol rounds and subsonic rifle rounds burning charges up to 20 grs., 16″ for high velocity rifle rounds and all others burning charges over 20 grains (see formula below for rifle cartridge & barrel length calculation).
Length (Inches): 6.5″; 6.8″ with included mount. TLX 5.5″ is 5.5″, 5.8″ with mount
Diameter: 1.3″
Weight (Ounces): 4.1 oz (.45) or 4.3 oz (9mm), 3.8 oz (5.5″ 9mm) with included mount
Attachment: 1.125-28 Alpha compatible, one direct thread mount in selected thread pattern included
Distance from rear face of Alpha threads to blast baffle tip: 9mm 1.0″, .45 1.08″
Suppression: ~32 dBA, ~29 dBA for 5.5″ (9mm subsonic tested 124.5 dBA muzzle/129.4 dBA at ear for 6.5″ and 128.8 dBA muzzle/129.8 dBA at ear for 5.5″ at 2024 Silencer Summit)
Build Materials: 6Al-4V gr. 5 titanium
User Serviceable: No
The included Ultralight mounts are Muzzle Registering (“face mount”; they have an internal shoulder) to be compatible with barrels that lack a shoulder. If your muzzle threads are longer than .43″, there will be a gap between the back of the mount and thread termination or shoulder. This is not a problem in itself, though not all muzzles are going to be suitable for it. The mounts have a hex to install/remove with conventional wrenches in 5/8, 11/16 or 3/4″ size, depending on the thread pattern (M14x1 RH and M16x1 RH are legacy mounts that require a pin wrench).
Use of cast lead bullets is not recommended with sealed suppressors. However, TLX can be cleaned with harsh chemicals that dissolve lead. Be sure to remove the aluminum mount first before submerging in solutions that are not aluminum-safe.
*We have not tested all possible host & ammunition combinations. Some pistols may need more energetic loads with a rigid mounted suppressor, and there are some hosts that simply don’t like to run suppressed, with or without boosters. We cannot guarantee function of all host firearms, only that all of ours have functioned with TLX using subsonic ammunition, and it is known in the industry that 4-5 ounces is the approximate limit for weight of a suppressor on most locked breech handguns to cycle without the use of a recoil booster. Hammer fired hosts tend to be more tolerant of added mass than striker fired, though our striker fired weapons have been reliable with TLX using common 147 gr. 9mm and 230 gr. .45 ball ammunition. Some pistols will need a booster assembly, such as our Alpha booster assembly, to cycle properly even with a 4 ounce suppressor (TLX does not have an integral booster housing and will not directly accept booster pistons).
Determining whether or not an unlisted cartridge is acceptable for TLX
As a comprehensive list of all acceptable cartridges would be insanely long, we have a formula you can use to determine if an unlisted cartridge burning a charge over 20 grains in a 16″ or longer barrel is acceptable for use with TLX or not. This does involve a little math, but it’s easy.
First, unless you know exactly the powder charge of each load you’ll be using, you need to look up load data and go with the largest powder charge listed for the lightest bullet weight you will use
Next you will need to determine bore volume, disregarding chamber size. Simply plug in the bullet radius (NOT diameter) in inches and barrel length in inches with a calculator like this one: https://www.google.com/search?client=firefox-b-1-d&q=cylinder+volume+calculator
Take that value, add 1, and then divide the largest listed powder charge for the cartridge by the sum of your cubic inch bore volume + 1. The value needs to be under 16 for use with TLX
For example, 7.62×39 uses a .311″ bullet, and the largest powder charge readily listed for a 123 gr. bullet is 28 grains
.311″ bullet diameter has a .1555″ radius, which in a 16″ barrel gives a bore volume of 1.215 cubic inches. So adding 1, the value we’ll divide the 28 gr. powder charge by is 2.215. 28/2.215=12.64
.45 70 with a 67 gr charge in a 22″ barrel gives us 14.5
5.56mm generally has charges of ~25 grs, so in a 16″ barrel we get a value of 15.3.
.243 win, on the other hand, uses a smaller powder charge than heavy .45-70 loads, but the bore volume is also much smaller. A .47 gr. powder charge in a 22″ .243 barrel gives us a value of 23.2. That’s too much.
In all cases, it is important to keep TLX below 800°F as with any titanium suppressor. That temperature is reached VERY quickly with rifle rounds through a 4 ounce suppressor. As the question comes up often, use with a 5.56 AR would require a 16″ or longer barrel and a sustained rate of fire not exceeding TWO rounds per minute. This is absolutely not a can meant for a 5.56 AR, but a very lightweight pistol can that happens to be strong enough for very light use with some centerfire rifles.
Handguns that we know to have difficulty cycling with TLX in rigid mounted (boosterless) configuration:
-Sig P320
-S&W Shield EZ .380
-S&W M&P Sheild 9

